Wardrobe Cutlist Calculator
Enter your wardrobe dimensions and configuration. Get a full parts list, optimised cut list, and material summary — ready to take to the workshop.
How to use this tool
- Choose your units — mm or cm, at the top of Dimensions. Everything you type uses that unit — the cut list itself always prints in mm for the workshop.
- Enter the carcass — on Dimensions, set the wardrobe height, width, depth and board thickness. These drive every panel size.
- Doors & back — set the number of doors, the door style, and whether there is a back panel.
- Build the sections — on Sections, lay out each internal zone: shelves, hanging rails and drawers. Add or reorder zones to match the design.
- Frame & panels — set any face-frame or panelling options for the look you are building.
- Read the results — you get a Parts List, an optimised Cut List, Zone & Material summaries, and an Edge Band Sheet, each on its own printed page.
- Save it (members) — log in as a Concierge member to save a cut list and reload it later from 📂 My Cutlists.
OVERLAY: How far the door covers the carcass frame on each side. Standard is 11mm. Gap values control clearance between door edges.
Each section has stacked zones (hanging, shelves, drawers). Set each zone height in mm. The counter shows total vs available inner height.
FRAME STRUCTURE: Front and back rails span the full unit width, sandwiching the mid-rails. Mid-rail count is auto-calculated from unit width.
MODULAR BUILD: Split wide wardrobes into independent carcass units. Each unit gets its own subframe, sides, top, bottom and back.
DEPTH AUTO-CALC: Panels extend past carcass face by door thickness + hinge clearance, hiding the door edge from the side.
Built by carpenters, for carpenters
Help Us Improve This Tool
This is an alpha release. Follow us on Instagram and TikTok — we'll announce updates, fixes, and new tools as we build them.